HC-1500AT
4
4-2. Specifications
Model HC-1500AT Specifications
Parameter
Description
Remarks
Frequency Range
1.8-50 MHz, all WARC bands included
Output Impedance Range
12.5 – 200
Ω
(SWR=4.0)
(*16.6 – 150
Ω
, SWR=3.0)
* Reduced range on 1.8,
and 50 MHz.
Maximum-Handling Power
1.5 kW (P.E.P./CW), 1 kW on 50 MHz
RTTY 1 kW recommended
Input Impedance
50
Ω
Tuning Power
10W min.
Tuning Time
1 sec. (typ.)
2.5 sec. (max.)
Under typical worst SWR
condition on 1.8 MHz
DC-Power Voltage
DC 12V – 14V
(5 mm
φ
DC jack)
From external DC power
supply (Power supply not
included.).
Current Drain
1.5 A max.
Quiescent Current
0.7 A
DC Power Polarity
Negative ground
Display
LCD Module
Character display
Operating Temp. Range
0 deg. to +40 deg. C
VSWR (Max.)
1.5 (typ.) or lower
After tuning
Circuit Type
T-shaped circuit
Driving Motors
Stepping Motors for Two Air Variable Capacitors
0.25 deg. resolution/step
L Changes
Relays to short
Matching Algorithm
Analog Control with MPU
Phase and [Z] Magnitude
Detected
Tuning Memory
93 x 3 ch. max.
For three ANT ports and
respective bands in total.
Dimension
200 x 140 x 300 mm (W x H x D)
Approx. 8 x 5.6 x 12 inches
Weight
Approx. 6.3 kg or 14.4 lbs.
Input Connector
SO-239 (UHF)
Output Connectors
Three SO -239’s
Cooling
Partial air forced cooling fan
Accessories
DC power cable with 5.5 mm dia. plug (4 feet)
Band control cable with DIN 7 pin plugs
(THP interface cable)
To connect the THP amps.
ALC/PTT Out cable with RCA plugs
To connect to amps.
Fuse
DC 2A, 2 pcs.