IBD-4110ACSKJ3M
IBD-4110ACSKJ2M
IBD-4110ACSK-JM
100094500016
100094500017
100094500018
01
取扱説明書
Ⅱ
−
39
76
…
Names of Parts and Their Functions
When the Airflow Direction Button is pressed, the airflow direction changes. This operation can be done using
either of the remote controls.
The airflow direction can be changed during all operations except ventilation operations (including 24-hour
ventilation) and water mist operation (low).
Operation of Airflow Direction Button and Position of Louver
Changing room
remote control
Bathroom
remote control
[Airflow direction]
1
1
[Airflow direction]
Display of
airflow direction
Display of
airflow direction
1
Press the Airflow Direction Button.
Each time pressing the Airflow Direction
Button, the airflow direction changes as
shown in the figure below.
The airflow direction is displayed on the
display screen.
(Swing)
[Toward
bath tub]
[Toward
washing area]
[Toward
bath tub]
[Toward
washing area]
Swing ran
ge
L0
L6
L1
L5 L4 L3
L2
[Toward
bath tub]
[Toward
washing area]
Swing r
ang
e
L0
L6
L1
L5 L4
L3
L2
[Toward
bath tub]
[Toward
washing area]
Swing rang
e
L6
L0
L1
L5 L4 L3
L2
¡
Airflow direction symbols on the display screen and the position of the louvers
Explanation
：
¡
The airflow direction (position of louver) on the
remote control is displayed on the display
screen for 5 seconds each time the Airflow
Direction Button is pressed.
¡
Do not try to move the louver manually.
This
can result in incorrect movement of the louver
when adjusting it using the remote control. In
addition, it can lower airflow performance,
a c t i v a t e t h e s a f e t y d e v i c e , o r c a u s e a
breakdown.
¡
Depending on the type of operation, the
position or movement of the louver may differ
slightly even when the same symbol for airflow
direction is displayed.
1
■During mist sauna or water
mist high operation
■During garment drying
operation
■During heating, cooling or
bathroom drying operation
…
75
Names of Parts and Their Functions
Changing Room Remote Control
Display
This displays the timer, temperature setting, and
airflow direction.
1
P19〜
Airflow Button/Swing Lamp
This switches the airflow direction (louver angle).
When "Swing" is selected, the Swing lamp is
turned on.
1
P19〜、76
Temperature Setting Button
This adjusts the temperature of the bathroom
during heating operation and during mist sauna
operation.
The temperature can be selected in one of three
levels during heating operation and one of five
levels during mist sauna operation.
1
P19〜
Temporary Stop Button/Lamp
This temporarily stops 24-hour bathroom
ventilation.
1
P45
Ventilation Button/Lamp
This performs the bathroom ventilation operation.
1
P33
24-hour Ventilation Button/Normal and
Winter Lamps
This switches between "Normal" mode and
"Winter" mode for 24-hour ventilation operation.
1
P43
Bathroom Drying Button/TIMER, AUTO, ECO
Lamps
This performs the bathroom drying operation. This
button is also used to switch between TIME,
AUTO and ECO modes.
1
P35
Garment Drying Button/TIMER, AUTO, ECO
Lamps
This performs the garment drying operation. This
button is also used to switch between TIME,
AUTO and ECO modes.
1
P35
Filter Sign Replacement Lamp
This lamp is lit when the accumulated usage time
reaches approximately 1000 hours. This
indicates that the air filter should be replaced.
1
P54
Time Setting ▼ ▲ Buttons
This sets the timer for each type of operation.
1
P19〜
Heat Timer Button/Lamp
This sets the time to start heating operation.
1
P30
Mist Sauna Button/Lamp
This performs the mist sauna operation.
1
P19
Stop Button
This stops mist sauna operation, water mist
operation, heating operation, cool air operation,
bathroom drying operation, garment drying
operation, and ventilation operation. (This button
does not stop 24-hour ventilation operation.)
1
P22〜
Heat Button/High and Low Lamps
This performs the bathroom heating operation.
This button is also used to switch between High
and Low.
1
P25
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1
9
10
11
12
13
14
2
6
8
5
4
7
3
