10
5. Operation Method
5.1 Starting Up and Ending
Switching on the power
1.
Press the Power button for approximately 2
seconds. (The product will emit a beeping
sound.)
2.
The startup screen appears for a few seconds, followed by the self-test
screen, which is also displayed for a few seconds.
❖
The startup time may be longer
depending on the temperature.
❖
The self-test is a self-diagnostic
test for accurate measurement.
❖
After the startup and self-test, if
you set the “1. Enable” in the “8.
Gas test” on the [SETTINGS]
screen, the proceeding screen for the gas test to be performed by the
customer will be displayed.
(See “5.6 Gas test by customer” for details about the gas test.)
3.
Once the measurement preparations have been
completed, the numeric mode screen shown on
the right is displayed, and the product becomes
stand-by state of measurement.
❖
The screen can be switched to the graph mode
by pressing the Display/Back button.
Numeric mode
Startup screen
Self-test screen
