11
Continued from the front chart
Alarm mode
Alarm Action
Value
Alarm hysteresis
value
Alarm Unit
Alarm start
delay
Alarm finish
delay
When character “ do ” is remote control mode, otherwise it is
alarm mode reference "4.9 alarm, transmission parameter
comparison chart"
1st alarm value setting, consistent with the basic display unit
alarm start delay time , unit : second
alarm finish delay time , unit : second
1st alarm hysteresis value setting, consistent with the basic
display unit
1: means international standard unit, K: means 1000 times of
international standard unit, M: means1000000 times of
international standard unit.
Alarm relay
setting
1st alarm relay output setting
/
/
/
Switch
Settings
2nd loop alarm parameter setting way refers to the 1st loop alarm
Period 12 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 1 Start Time
Period 2 Start Time
Period 12 Start Time
Period 12 rates
Period 1
Start time
Period 2
Start time
Period 12
Start time
Multi-rate
setting
Minute
Second
Minute
Second
Period 1 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 2 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 1 rates
Period 2 rates
Time
setting
Year
Month
Day
Hour
Year
Month
Day
Hour
Transmit high
limit
Transmit low
limit
Analog
output
Transmit output 20mA
Transmit output 4mA
Transmit mode
selection
Refer to “4.9 alarm, transimission parameter comparison chart”
Transmit unit
1: means international standard unit, K: means 1000 times of
international standard unit, M: means1000000 times of
international standard unit.
/
/
12
4.7 Menu modification example
2. Setting the communication address method
Primary
current
setting
( Unit:A )
Secondary
current
setting
( Unit:A )
1st level
2nd level
3rd level
Modified state
Measure state
System setting
sin
>5s
SET
SET
SET
SET
1. Setting the current ratio method
Instrument
address
setting
Communication setting
Modified state
>5s
SET
SET
SET
1st level
3rd setting
Measure state
System setting
Signal setting
2nd setting
