11
HOW TO OPERATE
1. Starting and Stopping the Hoist
1-1.
Operating Handle (Lever)
△
！
WARNING ;
Do not use or operate the operating handle
if it is not necessary to operate the hoist.
If the hoist is
not operated properly, it may lead to unwanted accidents.
1-2. Operation
△
！
WARNING ;
For initial start up, operate the hoist slowly
by pushing the lever gradually. If the wire rope is loose
and a load is suddenly lifted, this wll put unwanted stress on
the wire rope and hoist body leading to possible damage to
the hoist or shorter life of parts.
1-3.
Operation in the opposite direction
△
！
WARNING ;
Do not suddenly operate the hoist in the
opposite direction. ( See diagram 4)
This will lead to an impact load to the wire rope and body of
the hoist, leading to damage to the hoist or shorter life of
parts.
2. Operation of Hoist
2-1. Confirmation of Slings/Sling chains
△
！
WARNING ;
Before using slings, wire ropes or chain
slings always check the rated load for these items before
usage. Do not use slings do not meet the rated load of the
hoist.
2-2. Confirmation of the balance when using slings
△
！
WARNING ; When using a sling, confirm the load is
balanced correctly. ( See diagram 5 )
2-3. Avoid sudden operation or sudden change in direction
of the hoist.
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au