6
Radio Frequency
Torque W
rench with Double
Tightening Detection
3. Configuration
Slip type wrench QSPCAFHP,
Torque screwdriver RTDFH are
available
Setting BOX
SB-FH2
R-CM receiver
with M-FH module
Cont checker
CNA-4mk3
Wired
Wireless
Wired
Wired
Relay output
RS232C
3-digits ID,
7-digit alphanumeric
PC, PLC
Optional
RS232C
Setting data
Flow of operation
Flow of setting
Torque wrench
QSPFH
Torque wrench
QLFHSLS
Torque wrench
QSPCAFHP
Torque wrench
RTDFH
Transmitter
T-FHM / FH
Small size Transmitter
T-FHSLS
Wireless
Wireless
4. Specifications
Transmitter
Receiver
Setting BOX
Model
T-FHW
R-CM with M-FH module
SB-FH2
Frequency
2.4GHz band 2.402GHz - 2.479GHz, 1MHz interval, 78 kinds
Communication Metod
FHSS (Frequency Hopping Spread Spectrum)
Modulatoin
GFSK
Communication Speed
1Mbps/255bps
Grup
Gr000 to 255
ID
3-digits 000 - 999, 7-digits alphanumeric
Input/Output
Non voltage relay output 1a
RS232C output
RS232C input
Power Source
DC1.5V
AAA alkaline x 1
AC100V - 240V
47 - 63Hz 0.3A
DC9V
Alkaline x 1
Antenna
Chip antenna
Dipole antenna
Display
LED
Power LED, Receiv LED
Power LED, LCD
Operation Temperature
0 - 50
℃
Communication Distance
M-FH mode: 10-30m, R-FH mode: 10 - 20m
Note.
1. Transmitting/receiving distance varies depending on surrounding radio environment.
Radio frequency communication errors may be caused by noise or a shield placed between the
transmitter
and the receiver. In addition, radio waves reflected by metal, concrete, etc. may interfere with radio waves
directly sent to the antenna of the receiver and a dead point occurs, resulting in communication error.
2. For the battery life of the transmitter T-FHW, tightening operation can be performed about 150,000 times with a
new alkaline battery. The battery life varies depends on the length of tightening time due to angler detection by
gyro sensor.
3. Refer to each manual for receiver and setting box for details.
