16
Radio Frequency
Torque W
rench with Double
Tightening Detection
8-2. How to use Setting Software
1. Connect the setting box SB-FH2 to PC on which the Pokayoke Tool Parameter Setting Softare has been
installed with an RS232C straight cable, and turn on the setting box.
* Be sure to set one unit at a time. If multiple transmitters and receivers are set to the setting mode
at the same time, they cannot be set correctly.
PC
SB-FH2
RS232C
Straight Cable
2. Press SET switch on the T-FHW transmitter for 1 sec. to enter to setting mode.
When it has been set mode successfully, LED keep blinking in red.
3. Boot Pokayoke Tool Parameter Softare setting software.
If the PC has been connecting to SB-FH2 with RS232C straight cable and T-FHW is in the setting mode,
it will automatically connect to T-FHW.
