14/35
6. Power operation and connection for Bluetooth®
・
When press "Power" switch to turn on the tool the Bluetooth® powers on and the
red power LED turns on.
・
To turn off the Bluetooth® power, press and hold the “Power” switch more than 2
seconds during the tool power is on. (If press a “Power” switch the tool display only
turns off)
Please turn off the Bluetooth® power while not in use to save the battery.
・
When the Auto power off feature works the display turns but the Bluetooth® power
is on.
・
When the Bluetooth® is connected the blue STATUS LED turns on. It turns off after
disconnect.
7. External output format
7.1. Bluetooth® communication specifications
Bluetooth® version
Ver. 3.0
Communication method
AFH
Modulation system
GFSK
Radio output power
4 dBm
Transmission power class
Class 2
Profile
SPP
Communication distance
Approx. 10 m*
Acquisition condition
TELEC, FCC, IC, CE, SRRC, NTC, NCC, ANATEL, KC, WPC
*Communication distance varies depending on the performance of the radio wave
environment and communication connection partner device.
7.2. Communication conditions
Baud rate
Bluetooth®
Depend on a host device
PC/ USB
2400, 4800, 9600, 19200 bps
Parity
None
Data length
8 bit
Stop bit
1 bit
Flow control
Hardware (RTS/CTS)
※
Bluetooth® may be required to enter PIN code or passcode by the connecting device.
In this case, enter "0000".
※
When using optional USB (USB connector corresponding serial output) cable, catalog
#584, driver software is required to be installed on your PC.
