TOHATSU M 15D2, Owner'S Manual

Page: 53 / 76

INSPECTION AND MAINTENANCE
53
10
ENOM01005-0
Perform the following checks before and
after use. ENOW00078-0
Do not use outboard motor if any abnormal-
ity is found during pre-operation check or it
could result in severe damage to the motor
or severe personal injury.
*1 Have this handled by your dealer.
1. Daily Inspection
WARNING
Item Points to Check Action
Fuel System
• Check the amount of fuel in the tank.
• Check for dust or water in the fuel filter.
• Check rubber pipes for fuel leakage. Replenish
Clean or replace
Replace *1
Electrical
Equipment
• Check that the stop switch functions normally and make sure
the lock plate is there.
• Check cords for loose connections and damage.
• Check the spark plugs for dirt, wear and carbon build-up.
Remedy or replace *1
Correct or replace *1
Clean or replace
Throttle System
• Check that the choke solenoid and valve for the carburetor
function normally.
• Check if the carburetor and magneto work normally when
turning the throttle grip, and check links for looseness.
Replace *1
Correct *1
Recoil Starter
• Check ropes for wear and chafing.
• Check the ratchet for engagement. Replace *1
Correct or replace *1
Clutch and
Propeller System
• Check that clutch engages correctly when operating the shift
lever and remote control.
• Visually check propeller for bent or damaged blades.
• Check the propeller nut is tightened and the split pin is present.
Adjust *1
Replace.
Installation of
Motor
• Check all the bolts attaching the motor to the boat.
• Check the thrust rod installation. Tighten
Tighten
Cooling Water
• Check that cooling water is discharged from the cooling water
check port after the engine has started.
Repair *1
Tools and
Spares
• Check that there are tools and spare parts for replacing spark
plugs, the propeller, etc.
• Check that you have the spare rope.
Steering
Devices
• Check the operation of the steering handle and remote
control.
Repair *1
Other Parts
• Check if the anode and trim tab are securely installed.
• Check the anode and trim tab for corrosion and deformation. Repair if necessary
Replace