TOHATSU M 15D2, Owner'S Manual

Page: 50 / 76

50
9
ADJUSTMENT
ENOM00073-C
Tiller handle type
ENOW00074-D
Do not over tighten the steering friction
adjustment bolt it could result in difficulty of
movement resulting in the loss of control
causing an accident and could lead to severe
injury.
ENON00506-B
Note
The steering friction adjustment bolt is
used to adjust the friction load of the
steering, but not to fix the steering. Excess
tightening of the adjustment bolt may
cause damage to the swivel bracket.
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
bolt.
1. Steering friction adjustment bolt
2. Lighter
3. Heavier
ENOM00074-A
ENOW00074-B
Do not overtighten the throttle adjustment
screw or it could result in difficulty of move-
ment resulting in the loss of control causing
an accident and could lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
1. Heavier
2. Lighter
3. Throttle friction adjustment screw
ENOM00075-0
ENOW00074-C
Do not over tighten the remote control
throttle friction adjustment screw or it
could result in dif f icult y of movement
resulting in the loss of control causing an
accident and could lead to severe injury.
To adjust the friction of the remote con-
trol lever, turn the throttle friction
adjustment screw on the front of the
remote control . Turn c lock wise to
increase the friction and counter-clock-
wise to decrease it.
1. Steering friction
WARNING
1
3
2
ENOF01729-0
2. Throttle grip friction
WARNING
3. Remote control lever
friction
WARNING
2
1
3
ENOF00445-0