INSPECTION AND MAINTENANCE
53
10
ENOM00122-0
LPG tank, gas hose and connector
inspection
ENOW00953-0
Be sure to select LPG tank, gas hose and
c onne c tor in a c c ordanc e wi th re c om-
mended specification.
ENOW00954-0
z
Do not use a LPG tank expired life span.
Re qualification will be required after
specific years from the date of manufac-
ture. Please follow to the tank manufac-
tures' instruction.
z
Be sure to follow your tank, hose and con-
nector manufactures' inspection instruc-
tion.
ENOM00098-A
Gear oil replacement
ENOW00094-0
z
Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
z
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
z
Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
motor could lead to severe personal
injury.
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
3. Insert the oil tube nozzle into the
lower oil plug hole, and fill with gear
oil by squeezing the oil tube until oil
flows out of the upper plug hole and
bubbles is disappeared to remove the
air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 195 mL (6.6
fl.Oz).
4. Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
Oil plug specified tightening torque
4Nm (3 ft
-
lb, 0.4 kgf
-
m)
WARNING
WARNING
WARNING
ENOF01514-0
ENOF01515-0
