REMOVING AND CARRYING THE OUTBOARD MOTOR
41
8
Keep the outboard motor in a vertical
position when carrying.
The optional outboard motor stand is
recommended for keeping the outboard
motor vertical both during transport and
storage.
ENOM00442-0
If the outboard motor must be laid down,
be sure to close the valve of the LPG tank
and disconnect fuel line, and then turn
the engine until engine stop so that con-
sume the remaining fuel in the fuel sys-
tem completely. When laying down the
outboard motor, place front-side, star-
board-side, or port-side down on a cush-
ion or any softer surface shown below.
ENON00941-0
Note
When laying the outboard front-side
down, turn the clamp bracket 90° clock-
wise or anti-clockwise so that it does not
interfere with the ground. Then tighten up
the steering adjustment screw to maintain
its position (see page 43).
ENOM00072-A
ENOW00072-0
Trailering in the tilted position may cause
damage to the outboard motor, boat, etc.
ENOF01510-1
ENOF01511-1
3. Trailering
CAUTION
ENOF01532-0
ENOF01533-0
