77
SERVICING YOUR OUTBOARD MOTOR
5. Disconnect the 2 pin coupler (blue)
pushing up the lock tab.
6. Remove the 2 pin coupler (blue)
from the stay pushing up the lock
tab.
7. Remove the suspension strap from
the water separator bracket.
8. Bind the two fuel hoses with hose
clips to prevent fuel leakage, and
disconnect the fuel hoses.
9. Bind the drain hose with the hose
clip, and disconnect the hose from
the drain valve.
10. Remove the suspension strap
from the water separator.
11. Remove the three screws holding
the water separator, empty the
water or deposits from the inside
of the cup.
12. Reassemble the water separator in
the reverse order of removal. Use
a new O-ring.
TIGHTENING TORQUE:
2.5 lbf·ft (3.4 N·m, 0.35 kgf·m)
WATER SEPARATOR CUP
SCREWS
SUSPENSION
STRAP
O-RING (Replace)
2 PIN
COUPLER
(BLUE)
DRAIN VALVE
WATER SEPARATOR BRACKET
STAY
DRAIN HOSE
WATER SEPARATOR
SUSPENSION
STRAP
HOSE CLIP
HOSE CLIPS
STAY
2 PIN COUPLER (BLUE)
LOCK TAB
LOCK TAB
FUEL HOSES
31ZY2T000.book 77 ページ ２０１３年１０月１６日 水曜日 午前１１時４０分
Summary of Contents for BFT200A
Page 124: ...122 MEMO 31ZY2T000 book 122...
Page 125: ...123 MEMO 31ZY2T000 book 123...
Page 126: ...124 MEMO 31ZY2T000 book 124...
