TOHATSU BFT200A, Owner'S Manual

Page: 36 / 128

34
BEFORE OPERATION
ARE YOU READY TO GET
UNDERWAY?
Your safety is your responsibility. A
little time spent in preparation will
significantly reduce your risk of
injury.
Knowledge
Read and understand this manual.
Know what the controls do and how
to operate them.
Familiarize yourself with the
outboard motor and its operation
before you get underway. Know what
to do in case of an emergency.
Familiarize yourself with all laws and
regulations relating to boating and the
use of outboard motors.
Safety
Always wear a PFD (Personal
Flotation Device) while on the boat.
Attach the emergency stop switch
lanyard securely to the operator or to
the operator’s PFD.
IS YOUR OUTBOARD
MOTOR READY TO GO?
For your safety, and to maximize the
service life of your equipment, it is
very important to take a few moments
before you operate the outboard
motor to check its condition.

Be sure to take care of any problem
you find, or have your authorized
TOHATSU dealer correct it, before
you operate the outboard motor.
Before beginning your pre-operation
checks, be sure the ignition switch is
in the OFF position.
Improperly maintaining this
outboard motor or failing to
correct a problem before
operation can cause a
malfunction in which you could
be seriously hurt or killed.
Always perform a pre-operation
inspection before each operation,
and correct any problem.
31ZY2T000.book 34 ページ ２０１３年１０月１６日 水曜日 午前１１時４０分