72
OPERATION
9. If the fast idle control(s) was used
to start the engine, return the
control(s) to the normal operating
position as the engine warms up.
During the warm-up period, check
the oil pressure indicator (p.42),
overheat indicator (p.43), and
cooling system indicator (p.44).
10. Leave the alternator cover off, but
install the engine cover (p.94)
and lock it in place by latching the
engine cover latches.
11. If it was necessary to remove the
emergency stop switch lanyard
from you to perform the
emergency starting procedure, be
sure the lanyard is attached
securely to operator before
operating the outboard motor.
12. Have your closest authorized
TOHATSU dealer check your
electrical system and correct the
problem so that you can use the
electric starter.
STOPPING THE ENGINE
Emergency Engine Stopping
Remote Control Box:
Side-Mount Type
Panel-Mount/Top-Mount Types
Tiller-Handle:
(Tiller Handle)
EMERGENCY STOP SWITCH
EMERGENCY STOP SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
PULL
EMERGENCY
STOP SWITCH
CONTROL PANEL
EMERGENCY
STOP SWITCH
LANYARD
PULL
EMERGENCY STOP SWITCH CLIP
EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY STOP
SWITCH CLIP
PULL
