98
SERVICING YOUR OUTBOARD MOTOR
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the oil level dipstick
(p.95) with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
4.4 US qt (4.2 L)
With oil filter change:
4.6 US qt (4.4 L)
5. Install the oil filler cap and tighten
6. Install and lock the engine cover.
Oil Filter Change
1. Drain the engine oil, and reinstall
the drain bolt (see
Engine Oil
Change
on p.97).
2. Tilt the outboard motor, and place a
suitable container below the oil
drain guide to catch the used oil.
3. Use a suitable tool to remove the
oil filter, and thoroughly drain the
filter into the used oil container.
OIL FILTER
OIL DRAIN GUIDE
RUBBER SEAL
64 mm FILTER WRENCH
