49
CONTROLS AND FEATURES
<Display>
NMEA2000-compatible display:
• Follow instructions for the display.
• If the display allows selection of notification to be preset, select “Notify” (or
equivalent).
• Turn on the power supply to the display before turning on the ignition switch
of the outboard motor.
• The indication may differ, depending on the type of display.
When “Periodic Maintenance” is indicated:
1. Have the periodic maintenance performed without delay after returning to
port.
2. Reset the hour counter.
If not reset, the maintenance indication will remain in the display, and the
hour count until the next maintenance will be in error.
Steps
1
2
3
4
Outboard
motor
—
Ignition switch
ON
Start engine
Gear at F or R
Display
Switch ON
—
—
—
Maintenance
indication on
display
Not shown
Shown
Shown
Not shown
Maintenance
indication
Maintenance
indication
Maintenance
indication
Maintenance
indication
When the periodic maintenance is
conducted before “Periodic
Maintenance” is indicated, reset the
hour counter.
If not reset, the hour count until the
next maintenance will be in error.
