CLEANING GUIDE
1. Unplug the unit before cleaning.
2. Disassemble all the parts for them to air dry.
NOTE: Do not clean parts immediately after using, put
aside to air dry or in the refrigerator for around 2 hours.
Once the dough dries it will be much easier to clean.
3. Use the cleaning scraper to assist with cleaning of the
mixing bowl and axle after the dough has dried.
4. Use the cleaning scraper needles to clean the
extruding discs after the dough has dried.
5. After the excess dough is cleaned o
ff
the parts, it is
recommended to hand wash all the parts included
with the pasta maker with non-abrasive liquids and
sponge then dry with a cloth.
NOTE: Do not immerse the body of the unit into water or
liquid to avoid damage to the unit. Do not put any parts
into the dishwasher.
13
Cleaning the Fastening Plate
Remove the ring from the fastening plate by pushing on the
edge of the ring and hand wash both items. Once both are
dry make sure to replace the ring in the fastening plate.
Place the ring’s grooves to match up with the fastening
plate and push down. The ring will not move once it is in
place.