background image

3

Contents

Safety

1. This child car seat is approved for two different types of fitting: 

a) “Semi-Universal” with connectors locked onto the vehicle’s ISOFIT anchor points [also 

known as ISOFIX anchor points], used in conjunction with the vehicle’s 3-point safety belt. 

b) “Universal” for use with just the vehicle’s 3-point safety belt.

2. This is a “Universasl” child restraint. It is approved to ECE R44.04 For general use in 

vehicles and will fit most, but not all, car seats.

3. A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that 

the vehicle is capable of accepting a Universal child restraint for the stated age group.

4. This child restraint has been classified as UNIVERSAL under more stringent conditions 

than those which applied to earlier designs which do not carry this notice.

5. If in doubt, consult either the manufacturer or the retailer.

6. Only suitable if the approved vehicles are fitted with 3-point/static/retracting seat belts 

which are approved to ECE R16 or equivalent.

7. This is a “Semi-Universal” ISOFIT CHILD RESTRAINT SYSTEM. It is approved to ECE 

R44.04 For general use in vehicles fitted with ISOFIT anchorage systems.

8. It will fit vehicles with position approved ISOFIT attachment points (consult the vehicle 

handbook), depending upon the category of the child seat and of the ISOFIT fixture position.

NOTICES

Read carefully before attempting to fit the child car seat 

WARNING: NEVER leave your child unattended – your child’s safety is your responsibility.

WARNING: The child car seat must be fitted in accordance with the manufacturer’s instructions. 

Incorrect installation could be dangerous.

WARNING: This installation must only be performed by a competent adult. Don’t try to install the 

seat when intoxicated or drowsy.

WARNING: Always ensure that new or occasional users [e.g. Grandparents] have read the 

instructions or been taught the correct installation by someone who has read and understood 

the instructions.

WARNING: Always keep this instruction manual with the child car seat, or in the vehicle in which 

you are carrying the child car seat. Some models of child car seat have a pocket to store the 

instructions.

Getting started

Before starting

WARNING: Do not fit the child car seat on a side or rear facing vehicle seat.

WARNING: Before installing the child car seat ensure that the passenger seat you are using is 

locked in the upright position.

WARNING: Do not use the child car seat in the home - it has only been designed to be used in 

the car.

WARNING: Do not leave loose/unsecured objects on the back seat of your car or the parcel 

shelf. They may be dangerous to your child if you are forced to brake suddenly.

Summary of Contents for grow-fix

























Reviews: