16
Placing your child in the car seat [group1]
(continued)
E
4. Lock the vehicle’s seat belt into the
buckle (D) ensuring it “clicks” into place.
5. Pull the lap section of the seat belt
towards the buckle (E) and then pull the
diagonal section back up towards the seat
belt anchor point (F), ensuring the seat belt
is tight along its length.
Click
D
F
1. The impact shield (A) is not required
for group 2,3 and should be removed and
stored safely.
2. Place your child into the car seat.
A
Placing your child in the car seat [group 2,3]
Ensure you have installed the car seat correctly following either the instructions under “Installing the
group 1,2,3 car seat using the vehicle’s ISOFIT system” pages 9-10 or following the instructions under
“Installing the seat using only the vehicle’s seatbelt [groups 1,2,3]” page 13.
