15.
15.
14.
Cordless Cookie Press Use and Care Guide
14.
RECIPES
Holiday Butter Cookies
1/2 cup butter, softened
1/2 cup margarine, softened
3/4 cup sugar
1 egg
food coloring
2-1/4 cups all-purpose flour
1/4 teaspoon baking powder
1/8 teaspoon salt
1 teaspoon almond extract
colored sugar crystals
1. Preheat oven to 375˚F.
2. Use an electric mixer to cream the butter and margarine together
until fluffy. Gradually beat in the sugar.
3. Add the egg and a few drops of food coloring (red for Valentines
Day, green for Christmas Trees) and mix well.
4. Sift the flour, baking powder and salt together. Add half of the
flour mixture to the butter mixture and blend until smooth.
Repeat with the rest of the flour mixture.
5. Fill the Cookie Press with dough and select any Cookie Disc.
Select Cookie Disc 5 for Valentines Day, or Disc 1 for Christmas
Trees, or any other. Form the cookies on ungreased cookie sheets.
Decorate with colored sugar crystals.
6. Bake for 10-12 minutes. Remove from cookie sheets and cool on
wire racks.
Yield: 6 to 7 dozen
Recycling NI-CAD Batteries
This product contains nickel cadmium
rechargeable batteries. Batteries must be
recycled or disposed of properly.
This Cordless Cookie Press is equipped with long lasting,
Rechargeable Nickel Cadmium Batteries. To protect the environment,
they should be removed at the end of the batteries' life for safe
disposal in accordance with your local and state requirements.
To recycle your nickel-cadmium batteries, follow the directions
provided below. Please DO NOT put the main unit or batteries in the
trash. Use the collection system provided in your community.
Contact your local battery recycling center.
Batteries should be removed ONLY WHEN UNIT IS TO BE
DISCARDED.
Make sure Cookie Press Adaptor is unplugged before dismantling for
battery removal.
To Remove The Batteries
Remove the 2 screws on the bottom of main unit. Remove the bottom
Cover to expose a protective plate. Remove the 2 screws on the
bottom of exposed plate. Remove plate. The 2 halves of the Cookie
Press Handle should snap apart to expose a mounting bar that holds
the batteries in place. Remove 2 screws of the mounting bar. Remove
2 Ni-Cad batteries. Dispose of batteries according to local regulations.
