GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug.
(2 blades and 1 pin) If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or use
an adaptor.
DESCRIPTION OF PARTS
1. Power Base
2. Kettle
3. Water Level Window
4. Lid Release Buttons
5. Hinged Lid
6. On/Off Switch
7. Keep Warm Switch
8. Filter
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Install the Filter before using the Kettle. (See the Care and Cleaning section).
4. Water boiled for the first time should be discarded.
INSTRUCTIONS FOR USE - Conventional Boiling Method
1. Install the Filter, if not already in place. Never use the Kettle without the
Filter. Removal of the filter may prevent the Kettle from shutting off.
2. Open the Lid by depressing the 2 Lid Release Buttons simultaneously and
grasping the central bar. Lift the hinged lid backwards. The Kettle can
also be filled through the spout.
3. Ensure that the On/Off Switch is in the Off ('0') position.
4. Fill the Kettle with cold water between the minimum and maximum
levels shown on the Water Level Window.
DO NOT attempt to fill while the Kettle is on the Power Base.
3
1
2
3
4
7
5
6
8
Booklet TJK-314 v3.qxd 9/06/05 16:36 Page 11
