OPERATION
Set the program switch to PROGRAM
OPERATION
PROGRAM
The channel indicators (A, B, C and D) and pause mode
indicator flash.
Press the PAUSE key.
PAUSE
Its indicator comes on, while the date indicators from
Monday to Sunday flash.
Press the STORE key.
STORE
The word "PASS" appears in the clock display, indicating that the
three days have been registered for pause.
(The contents of the program are not registered unless the STORE key is pressed.)
When the current day is set after the pause registration, perform the new pause registration.
Set the program switch to OPERATION after finishing programing.
USING FRONT-MOUNTED AUTO/OFF
This switch is used to stop actions of an output relay regardless of the timer program. When the switch is set to
AUTO, the relay functions as programed. Setting the switch to OFF does not activate the relay. The switchover
is possible per channel.
Designate a day(s) of the week.
MON
TUE
WED
Press the day settings of Monday, Tuesday and Wednesday,
and each corresponding day indicator comes on.
When the wrong day setting has been pressed, press that setting
again. The date indicator goes out.
13