OPERATION
Press the A channel selector.
This causes the A channel indicator to come on and both the DAY
and TIME mode keys to flash.
A
Press the TIME mode key.
TIME
The TIME mode indicator comes on and a flashing dotted line
" — — — — " is indicated in the display.
Press the CANCEL key with the A channel selector continuously pressed.
The word "PASS" appears in the display, indicating that the whole time
program registered into the A
channel has been cancelled.
A
CANCEL
Similarly, the whole time program registered into each of the B, C and D channel can be cancelled. For the day
of the week, perform individual cancellations as instructed in the section 4 under the heading of PROGRAM
PROGRAM OPERATION
OPERATION
PROGRAM
PAUSE MODE
The PAUSE key is used to temporarily make the timer not to function on particular days.
This is possible for up to the 7th day from the day of registration.
No output is delivered from the timer on a day set for pause.
After the pause day is over, the timer automatically returns to the normal state.
Use the pause function in such a case as the following example.
Example. Today is Friday and we want to stop the timer operation on Monday through Wednesday of next week
since our office is closed on these three days due to holidays.
(When it is on Monday that Monday is registered for pause mode, the pause day is a Monday of the following
week.)
Follow the procedures below to make Monday through Wednesday the pause days as in the example.
Be sure to set the program switch to OPERATION
after programming is finished. The timer does not
work if the switch is set to PROGRAM.
12
