34
M-802RC Editor
2
3
4
5
6
8
9
10
7
1
1. Select Channel to Control Volume:
-Input Channel:
Check the box to control the input of multiple channels at once.
-Output Channel:
Check the box to control the input of multiple channels at once.
2. Enable Routing Function
-Output Channel 1 - 12:
Check the box to control the routing of multiple output channels at once.
3. Lock System:
The user can enter numbers and letters as password and click lock. If he forget the
password that can use factory password: 0000.
Note:
No other password can be set after unlocking, you must first lock and then unlock with 0000 to set
a new lock password.
4. Device Name Setting:
Click to modify the device name, after modification, click Save To Device to
save.
5. Load From Device:
Load presets from device.
6. Save to Device:
Save preset parameters to the device.
7. Screen Saver:
After checking this box, the machine will sleep after one minute of inactivity.
8. Default:
Initialization parameter setting.
9. Load From PC:
Load presets from PC.
10. Save To PC:
Save current preset.
Attention:
The volume can only be switched on the terminal after the PC software is set, and the volume
cannot be adjusted on the terminal
Note:
The factory setting is ON. In order to prolong the life of the LC-Display, it is recommended that the
user set it to ON.