Function Example:
Adjusting the high-pass filter to 32.7Hz. Type is adjusted to BW24. Drag EQ1 to 54.4Hz and adjust the Q
value to
Attention:
In case of
M-800RCT
, the individual name setting is not transmitted automatically to the device.
Use the seperate Setting page of
M-800RCT
for setting individual names to be transmitted and indicated
on
M-800RCT
.
2.0. Gain up to 8dB. Drag EQ2 to 315Hz. Q value is adjusted to 2.5. Gain to 2.5dB. EQ3 type to
1.45kHz The Q value is unchanged. The gain is attenuated to -2.5dB. The EQ4 type is adjusted to
406.1Hz. The Q value / gain is unchanged, and the EQ5 type is adjusted to 8.38KHz. The Q value does
not change and the gain reaches 4dB.
7.2. MATRIX
This part of the software is used to route inputs through a graphical representation as a matrix. By clicking
on the gray boxes several inputs can be assigned to several outputs. If the connection is active the box
turns green, otherwise it remains gray.
The matrix can route 12 input signals to 12 separate outputs. One talks about a 12×12 matrix.
17