7.1. INPUT DSP CHANNEL
1. EXP/Gate:
The gate attenuates signals below the threshold value, and allows signals above the
threshold value to pass. When the signal is beyond the threshold, the output signal remains identical to
the input signal. By adjusting the value of the ratio to its maximum, the Expander is transformed into a
Noise Gate.
Threshold:
-80dB to +20dB.
Click this button to set the noise gate trigger level of the selected channel.
Ratio:
Gain ratio between the input signal and the amplified signal, from 1:1 to 10:1
Attack:
reaction time when the signal is above the specified threshold, from 10 to 150 ms.
The attack time is how long it takes the gate to fully open once this threshold has been reached.
Release:
reaction time of the Expander when the signal passes below the specified threshold from 10ms
to 1000 ms.
Bypass:
Press this button, the function of this area is invalid.
Default:
Restore this area to default settings.
2. DC48V:
Note this button is only used for external condenser microphone, otherwise it may damage
your device, 48V phantom power for electric microphone.
3. Polarity:
inverts the phase of the signal by 180°.
4. Microphone Sensitivity:
Input sensitivity for a microphone, from -48dB to 0dB.
15
1
9
10
11
12
13
2
4
5
7
6
8
3
7. SOFTWARE EDITOR