< Calling party selection >
1. When there are more than 2 incoming calls to a busy
station, the calling parties' lamps on the indication
panel come on. The called party may select the
calling party he wishes to respond to by touch dialing
plus
(desired calling party's number).
In this event, the original conversation is finished.
2. In the event that a station in the busy mode receives a
call that is indicated on the indication panel, by
touch dialing
(the calling party's number),
the called party is put through to the calling party,
while the original conversation partner is placed on
"hold" temporarily. (Refer to "Call Transfer" and
"Call Back".)
Indication panel at station No. 239
Calling Party Indication ( Numerical Type)
A numerical type calling party indication panel can be
provided for certain specified stations (32 stations from
No. 201 to No. 232).
1. The party receiving the call is indicated in the area for
the calling station number with 7 segment display.
2. When a call is made to the busy or the privacy station
(with the privacy switch on), the number of the calling
party is indicated in the area for the waiting station and
as a 1 in the number of waiting stations area. If there are
other stations waiting, the station numbers are stored but
not indicated. A maximum of 8 waiting stations can be
indicated. Even if a call is cancelled by a waiting station,
the indication is not cancelled.
3. When a call is placed to a station in the waiting station
mode, the next stored waiting station is indicated.
4. If a call is cancelled at the completion of a call, the
indication is turned off.
5. To cancel a waiting station number without calling, dial
to have the next station number indicated. *1
Note.
*1. In the case of Handset Master station TL-600M, lift
a station handset and confirm that a dial tone is
heard. Press
after cancelling the dial tone by
pressing
1. If the number of waiting stations exceeds 8, the
indication for the station that has been waiting for
the longest period of time is cancelled and the
next station moves into that place.
2. The indication panel must be used with the Data
Transmitting and Receiving Units. For further
details, please refer to the Installation Hand Book
for CP Unit and Instructions for the Data Trans-
mitting and Receiving Units.
No.208
Responding to a selected
calling party
No239
No201
(Station No. 201 is disconnected)
or
(Station No. 201 is on "hold")
Indication panel at station No. 231
No235
Camp-on-busy
No234
During a call
No.231
Conversation
Calling station
number
Waiting station
number
Number of
waiting
stations
– 56 –
