Toa EXES 6000 CP-64 Functions And Operating Instructions Download Page 43

Page: 43 / 102

Paging

A variety of paging modes allows paging over a wide area
from any master station. The paged party may respond

from the nearest master station.

Paging modes include external PA systems and/or Station
paging and Zone paging is for calling a limited area, and

All-call paging is for calling over the entire area.

Response to a paging call may be made by means of Auto-

matic response or Zone number dialing.

1. External PA paging and Station paging

A. External PA paging

1. Paging through external speakers is possible from any

master station, with the paged party able to respond

from the nearest master station.

2. External PA paging zones and all-call paging are

possible up to a maximum number of 31 zones

(zone 1 through 31).

B. Station paging

1. Paging from any master station to all stations within

a certain area is possible through the station speakers.

But the page will not be heard at stations in use in the
area.

2. Station zone paging and all-call paging are possible

only within zone 1 through 31.

3. Responding to a paging call

A. Automatic response

1. Zone paging response

Touch dialing

at the station within the paged

zone permits a response to the party who placed a
paging call.

In this event, No.200 registration of the stations

(consecutive station numbers) within each zone must

be made.

2. All-call paging response

Touch dial

at any station and the paged party

is put through to the party calling.

B. Zone number dialing

1. Zone paging response

The paged party is connected to the party calling by
depressing.

(Zone number)

at any station.

2. All-call paging response

Depressing

permits a re-

sponse to the party calling.

2. Zone paging and All-call paging

A. Zone paging (Individual zone paging).

Paging and Paging response are possible through Zone
paging. To page a specific zone, press

and the

zone number. To respond to a zone page, press simply

plus the zone number.

Paging to zones 1 through 31 may be made through
external PA paging using the external amplifiers and

speakers, and/or through station paging using the station

speakers.

B. All-call paging

Paging and Paging response for External PA and/or

station paging is possible through All-call paging. To
make an all-call page, press

(maximum of 9

zones) or

(maximum of 31 zones). To

respond, press

This does not necessarily mean that All-call station
paging must reach all the stations.

– 40 –

Summary of Contents for EXES 6000 CP-64







































































































Search results

Summary of Contents for EXES 6000 CP-64

Reviews:

Related manuals for EXES 6000 CP-64

Brands by name

Popular brands

Toa EXES 6000 CP-64, Functions And Operating Instructions

Search results

Summary of Contents for EXES 6000 CP-64

Reviews:

Related manuals for EXES 6000 CP-64

Brands by name

Popular brands