8-13 PAGING ZONE (FUNCTION CODE 70)
NOTES
1. To release at one time the data programmed into all the
Zones for this function,
Touch
(Confirmation tone
will be heard.)
2. Re-start at Step 1 when mis-dialing occurs.
(All other registrations remain valid.)
3. Station No. should be 2 digits in length when 2 Digit Dialing
function is employed.
4. Switch B-4 must be "ON" to employ this function.
5. 2-Digit dialing is necessary even in the case of Zone No. 1
to No. 7.
Ex. Zone No.2
6. In the case "Paging Response Without Zone Number" mode
is selected by the DIP Switch SW-E-2, this
registration is essential.
7. In the case "Paging Priority" function is adopted by the DIP
Switch SW-C-3, this registration should be made for each
Paging Zone of No. 01 to No. 07.
ESTABLISHMENT OF EACH PAGING ZONE
Step 1
Touch
Function Code
Paging Zone No.
(01 ~ 15)
1st Station No.
of the Zone
Last Station No.
of the Zone
Touch
Paging Zone No.
(01 ~ 15)
1st Station No.
of the Zone
Last Station No.
of the Zone
Touch
Confirmation tone
New Registration finished?
Return
— 31 —
All manuals and user guides at all-guides.com
