FUNCTION CODE TABLE FOR STATION NO. 200 PROGRAMMING
B. Programming of System
Function
Group
S
Function
Selection of Calling Tone
Selection of Paging
Pre-announcement
Tone Duration
Time-out of Conversation
Time-out of Paging Call
Function
Code
41
42
43
44
Remarks
Two different calling tones, single note tone or
trill note tone, are available in selection for
the Hands-free system except the continuous
calling tone.
You can select the length of time of paging
pre-announcement tone.
Stations can be disconnected automatically
from the speech path in the unit of Minute and
the Hurry-up Signal Tone can be heard 10
seconds before the disconnection.
Stations can be disconnected automatically
from the Paging circuit in the unit of Minute
and the Hurry-up Signal Tone can be heard 10
seconds before the disconnection.
Initially
Programmed
Mode
Trill note Tone
(0.3 sec.)
Paging
Pre-announce-
ment Tone
(2 sec.)
Without
Time-out
Without
Time-out
Operating for Programming
0: Without Calling Tone
1: Single Note Tone (0.2 sec.)
2: Trill note Tone (0.3 sec.)
0: Without Paging Pre-announcement Tone.
1: Paging Pre-announcement Tone (1 sec.)
2: Paging Pre-announcement Tone (2 sec.)
00: Without Time-out function
01~99: Length limited (minute)
00: Without Time-out function
01~99: Length limited (minute)
— 16 —
All manuals and user guides at all-guides.com
