5. SETTING DIP SWITCH POSITIONS FOR FOUR (4) DIFFERENT TYPES OF DIAL OPERATION
The EXES-6000 system incorporating the CP-62 enables you to select the most suitable Numbering Schedule and Dial Operation of functions,
depending on the Number of stations and on the functions required for the system.
2-Digit Dialing
Selectable Function
Code
Selectable Numbering
Schedules
Numbering Schedules
SW-C-6
SW-E-1
SW-C-1
Hardwired
Station No.
Programmed
Station No.
Conference
Single Digit Registration
Paging Call
Comparison with the EXES-5000
Item
Type and Feature
of Dial Operation
Type 1
3-Digit Dialing, Standard
Type 2
3-Digit Dialing, Prog. St. No.
Type 3
2-Digit Dialing, Paging mainly
Type 4
2-Digit Dialing, 90 Stations
OFF (3-Digit Dialing)
ON (2-Digit Dialing)
OFF (200 (20))
No.200~327
No.200~399
ON (100 (10)) *3
No.100~227
No.100~399
OFF (200 (20))
No.200~327
No.200~999
ON (100(10)) *3
No.100~227
No.100~999
OFF (200 (20))
No. 20~79
(60 Stations)
ON (100 (10)) *3
No. 10~79
(70 Stations)
OFF (200 (20))
No.20~99
(80 Stations)
ON (100 (10)) *3
No.10~99
(90 Stations)
More functions but same easy dial
operation as the CPU-52A per-
mits.
3-Digit Dial Operation allowed by
the CPU-55. Used when "Pro-
grammable Station Numbering"
in necessary.
New type which gives an easier
access to Station Calling and
Paging in Dialing.
2-Digit Dial Operation allowed by
the CPU-55.
*4 In the case the DIP Switch is selected for "Without Zone Number (SW-E-2:
ON)", the Programming at No.200 Station for "Paging Zone Registration
(Function Code 70)" is essential in order to operate Paging Response to a
Zone Paging.
*5 Key operations for "General Purpose Control" always require dialing
in
the first place of each function dial operation regardless of the position of
the DIP Switch SW-E-1.
*6 Refer to our "Functions & Operating Instructions for EXES-6000 CP-62" as
to dial operations for each function.
Note:
*1 In the above table,
means a numerical dial number.
*2 In the case the DIP Switch SW-E-1 for "Selectable Function Code" is placed
to OFF position while the SW-C-6 for "2-digit Dialing" is in ON position,
you cannot omit dialing
in each function dial operation except the cases
for "Paging" and "Paging Response".
*3 in the case the DIP Switch SW-C-1 for "Selectable Numbering Schedules" is
turned to ON position "No.100 (10)", both of the "Personal Number Call"
and "Personal Number Paging" cannot be operated.
Paging
Response
SW-E-2
OFF
ON
*4
— 11 —
All manuals and user guides at all-guides.com
