7
4. Troubleshooting
If you are experiencing an issue with your splitter, trying the troubleshooting
tips below may help to resolve the problem:
•
If the video image is not being received or displayed correctly, press the
RESET button. This will reset the unit and resend the signal to the
connected monitors.
•
power supply is receiving power by plugging something else into the same
Confirm that the Power LED is illuminated. If not, check if the external
power source. If it is receiving power, make sure the power supply is
securely connected to the splitter. If the LED is still not illuminated, use a
volt meter to ensure the power source is providing enough power for the
external power supply.
•
Make sure that the cables you are using are functioning properly
by connecting them directly between the source and display/speakers.
Test all cables in the installation to make sure they are functioning properly.
•
If the cables you are using are functioning properly, test each port on the
splitter to make sure it is working. Using the cables you just tested, connect
the source to the splitter, and then a set of output ports to a monitor and
speakers. Test each port to make sure it is functioning properly.
201004020 93-2998.indb 7
4/29/2010 4:43:08 PM
