JBS-100-STB
Single Entry Power Connection With Junction Box
Installation Instructions
nVe
nt.com
DESCRIPTION
The nVent RAYCHEM JBS-100-STB is a NEMA 4X rated power
connection kit. It is designed for use with BTV-CR, BTV-CT, QTVR-CT,
XTV-CT, KTV-CT and VPL-CT industrial parallel heating cables.
The JBS-100-STB utilizes screw terminal blocks to connect the
heating cable to power.
This kit may be installed at temperatures as low as –40°F (–40°C).
For easier installation store above freezing until just before
installation.
For technical support call your local nVent representative.
TOOLS REQUIRED
• Wire cutters
• Pliers or adjustable wrench
• Utility knife
• Needle nose pliers
• Large slotted screwdriver
• Marker
• 1/4 in or smaller flat-blade screwdriver
• Wire stripper (for VPL-CT)
ADDITIONAL MATERIALS REQUIRED
• Pipe strap
• GT-66 or GS-54 glass cloth tape
OPTIONAL MATERIALS
• Recommended conduit drain:
JB-DRAIN-PLUG-3/4IN P/N 278621-000
• Small pipe adapter for 1 in (25 mm) and smaller pipes:
Catalog number JBS-SPA P/N E90515-000
APPROVALS
Class I, Div. 2, Groups A, B, C, D
Class II, Div. 1 and 2, Groups E, F, G
Class III
Temp Code*
CLI, ZN1, AEx e II*
(1)
Ex e ll T*
(1)
Except VPL
*For system Temperature Code, see heating cable or design documentation.
Hazardous Locations
-WS
