GSM Dream
DREAMBOX cable for new SIEMENS-BENQ phones
Technical Documentation
DREAMBOX cable for new BENQ-SIEMENS phones
If you have a new BENQ-SIEMENS connector - use the following schematic to modify the cable.
Resistor R3 (1Mega Ohm) needs to be replaced with resistor, nominal resistance 100 Ohm.
Notes:
1.
At least two wires must connect ground (RJ-45 pins 9,10 to Benq-Siemens connector pin 5).
2.
Connect shield to ground on both cable sides.
