16
Instructions for Use
TNI
soft
Flow
2.1.5 Assembly of Humidifi er Homecare
Assemble the humidifi er according to following descriptive picture sequence:
Fill the water chamber with boiled tap water (max. luke-
warm), non-carbonated drinking water or sterile water, up
to the “max.” mark.
Put the cyclone and the lid from above onto
the water chamber.
Close the lid and lock it by lowering the locking tabs.
Carefully push the Humidifi er Homecare
complete into the device. Close the housing
front lid by fl ipping it up.
WARNING
•
Empty the humidifi cation chamber completely before transporting or moving the device!
2.1.6 Water refi ll in Humidifi er Homecare
• Change of water in the Humidifier Homecare is due daily.
• Disassemble the individual components of the Humidifier Homecare and rinse them under running
water.
• Soak a soft, lint-free cloth in lukewarm water with a little amount of mild, standard household clea-
ning detergent and wring it afterwards.
• Rub and wipe the damp cloth over the surfaces of the unit and its components and along the edges
and joints to remove visible dirt deposits and calcifications.
• Rinse the components under running water.
• Wipe dry all components with a dry, soft, lint-free cloth to avoid calcifications.
• Just before the next use, refill the water chamber with recently boiled tap water (max. lukewarm),
non-carbonated drinking water or sterile water
max.
min.
1
3
2
4
5
