TMQ Bosun-AP9, Operation And Installation Manual

Page: 6 / 63

TMQ Bosun - AP9 Rev1 (935) Page 6 16/06/2003
Introduction
The
Bosun autopilot is a hybrid of digital and analogue technology to give
the best of both worlds - excellent steering characteristics with digital
compass display, keypad course input, GPS and gyro interfaces, and much
more, in a solid metal case.
A Bosun system comprises:
•
Autopilot Unit
•
Compass
•
Rudder Feedback
•
Up to two Hand Remote/Panel Remote/Steering Lever/Wheel units
•
The facility for remote display heads or active hand remote.
The Bosun AP9 Autopilot controls the vessel steering through mechanical
drive, reversing pump set, solenoid valves or relays.
The autopilot unit should be installed out of direct sunlight and protected
from water and spray.
The compass must be installed in a place free of magnetic interference, and
connected to the autopilot via the cable supplied.
The rudder feedback must be attached to the rudder in such a way that it
can accurately measure the position of the ships rudder. This must also be
connected to the autopilot via the cable supplied.
Provision has been made for:
hand remote , panel remote , steering lever
or steering wheel stations. These are very robust units, which will not be
adversely affected by water. The abilities they provide are somewhat
different from the main control panel. See the Operation section of this
manual for details.