TMQ Bosun-AP9, Operation And Installation Manual

Page: 15 / 63

TMQ Bosun - AP9 Rev1 (935) Page 15 16/06/2003
Stopwatch Timer Mode
The Bosun has two timer systems. One, an adjustable timer operates in all
modes.
The second timer is the commercial watch alarm operates in any auto
modes i.e. Auto, GPS or Auto Remote, and is disabled when the autopilot
is set to
Standby or Power steer .
To set the timer, enter a value between 1 and 60 at the keypad, and press
the timer key. That value will be stored into the timer, and it will begin
counting down to zero. The timer light will be on, to indicate that the timer
is running. When the timer expires, an internal alarm will sound and the
timer light will flash. If the timer is not reset within one minute, the
external alarm (if fitted) will sound.
If the timer button is pressed with no number entered on the keypad, and
no timer alarm sounding, the timer delay will be displayed, and the timer
will commence counting down.
While the alarm is sounding, pressing the timer button will cause the timer
alarm to cancel, and the timer to begin counting down again. The time
delay set will NOT be displayed.
Selecting a stopwatch time of zero will disable this feature.
If the
Commercial watch alarm feature is enabled, the timer alarm delay
in all modes except standby is fixed.