TMQ AP55 Display Head
Page 23
Ver1.0 08/12/2005
Disengaging REMOTE AUTO Mode:
Setting remote switch to OFF will select MANUAL mode.
Or
Pressing the AUTO button on the Display Unit will select MANUAL
mode.
Remote Course Adjustment:
Turning the remote dial will alter the course-to-steer. This change will
be reflected on the Display Unit. From the central position of the
remote dial, the course may be changed to PORT or STARBOARD by
90 degrees. The vessel will steer the new adjusted heading.
REMOTE Power Steer
(Remote Unit Operation
)
Hand remotes, panel remotes and steering lever stations all come with
a dial or lever and selection switch. The switch will be marked for the
POWER MODE to be selected.
While the autopilot is in this mode, the Display Unit LEDs will
indicate REMOTE POWER and the numeric display section will show
the current magnetic heading.
Engaging POWER STEER Mode:
Move the remote switch to the PWR position.
The remote dial or lever now acts as the helm, giving control over the
angle of the rudder.
With remotes with toggle switches, if the switch has been left at PWR
and the autopilot turned OFF, or the AUTO or MANUAL button
Summary of Contents for AP55 Display Head
Page 1: ...AP55 Display Head OPERATION AND INSTALLATION MANUAL www tmq com au...
Page 2: ...TMQ AP55 Display Head Page 2 Ver1 0 08 12 2005 This Page is Blank...
Page 32: ...TMQ AP55 Display Head Page 32 Ver1 0 08 12 2005 AP55 Circuit Diagram...
Page 33: ...TMQ AP55 Display Head Page 33 Ver1 0 08 12 2005 AP55 PCB Layout...