TMQ AP55 Display Head
Page 22
Ver1.0 08/12/2005
Off Course Alarm
The AP55 allows for monitoring of the autopilot course holding ability
by having the angle off-course measured and alarm sounding if greater
than 45 degrees from the desired course.
If the difference is greater than 45 degrees between the heading and the
course to steer, the alarm will sound and the Auto LED will flash
REMOTE AUTO
Mode
(Remote Unit Operation
)
Hand remotes, panel remotes and steering lever stations all come with
a dial or lever and switch.
While the autopilot is in this mode, the display LED will indicate the
mode used, i.e., REMOTE AUTO and the numeric display section will
show the course-to-steer.
Engaging REMOTE AUTO Mode:
Select AUTO on the remote by the switch or button marked AUTO
The remote dial or lever now controls the course-to-steer.
For remote units with toggle switches, if the switch has been left at
AUTO and the autopilot turned OFF, or the AUTO or MANUAL
button pressed on the Display Unit, you will need to move the switch
to centre (OFF), then back to AUTO to re-engage REMOTE AUTO
Mode.
Summary of Contents for AP55 Display Head
Page 1: ...AP55 Display Head OPERATION AND INSTALLATION MANUAL www tmq com au...
Page 2: ...TMQ AP55 Display Head Page 2 Ver1 0 08 12 2005 This Page is Blank...
Page 32: ...TMQ AP55 Display Head Page 32 Ver1 0 08 12 2005 AP55 Circuit Diagram...
Page 33: ...TMQ AP55 Display Head Page 33 Ver1 0 08 12 2005 AP55 PCB Layout...
