TMQ AP55 Display Head, Operation And Installation

Page: 18 / 33

TMQ AP55 Display Head Page 18 Ver1.0 08/12/2005
Initial Settings
Selecting the Initial settings of the Autopilot:
A number of system settings may need to be carried out prior to using
the AP55 Autopilot. Two initial settings can be carried out from the
Display Head.
•
Rudder Limits.
•
Compass Calibration.
Rudder Limits
The rudder limits prevent the steering motor driving the rudder beyond
its physical (mechanical) stops. The limits are factory set and should not
need altering. However, the limit setting can be set from the display of
the AP55 if deemed necessary.
•
Set the rudder to the desired Port position
•
Select SET PORT LIMIT. By pressing the MODE button five times
until “PL**” is displayed.
•
Press the < > buttons simultaneously to set the Port Limit.
•
Set the rudder to the desired Starboard position.
•
Select SET STARBOARD LIMIT. By pressing the MODE button
six times until “SL**” is displayed.
•
Press the < > buttons simultaneously to set the Starboard Limit.