4 of 28
TMQ AP47 - SS35
Overview
Standard Equipment
• AP47 CDU ‘Control Display Unit’
• ELECOM - electronic compass /
e-compass
• RFUS - rudder feedback unit
(optional)
Additional Equipment Required
(not standard supply)
1. Drive motor
– to allow the AP47
to control the vessels steering
system.
• Hydraulic steering systems with
a helm pump and ram will require
one of the following;
• Reversing hydraulic motor/
pump-set, tapped into the
existing hydraulic steering
system or;
• A constant running hydraulic
pump with direction control
solenoids.
A mechanical steering system will
require;
• a reversing mechanical drive,
connected to the existing
steering ram mechanism.
2. Termination hardware;
• Terminal blocks (suitable for
0.75mm
2
and 2.5mm
2
cables)
• Circuit breaker / switch
(15A rated)
• Wiring extension cables / ferrules /
crimp lugs & related crimp tools
• 2c x 2.5mm
2
for extending motor
and power cables (larger for long
cable runs)
• 1 pair 0.75mm
2
for each nmea
interface cable
System Block Diagram
12 OR 24 VDC
BATTERY
*CUSTOMER
SUPPLIED
AUTOPILOT
DRIVE UNIT
*CUSTOMER
SUPPLIED
PILOT CONTROL
DISPLAY UNIT
ELECTRONIC
COMPASS
RUDDER
FEEDBACK
UNIT
*OPTIONAL
GPS (NMEA I/F)
*CUSTOMER
SUPPLIED
OPTIONAL
10m SUPPLIED CABLE
30CM FLYLEAD
FOR BATTERY
& MOTOR
CONNECTIONS
CUSTOMER
SUPPLIED
CABLES & TERMINALS
5m SUPPLIED CABLE
