Installation Steps
1. Unpacking the Oven
5
WARNING: Use two or more people to move
and install oven. Failure to follow this
instruction can result in back or other injury.
WARNING: Never use door handles or any
portion of the control panel or trim for lifting
the oven. This may cause severe damage to
the product.
Make sure the breaker for oven power supply is
turned off.
1
Move oven close to final installation position prior
to removing packaging materials.
2
Carefully remove plastic wrapping, polystyrene
protectors, cardboard, and blue tape. Care should
be exercised if using a knife or sharp object to cut
plastic or tape because permanent damage to
stainless steel could occur.
3
4
Remove (4) screws from shipping brackets from
both sides of the oven.
The oven should never
be laid on its back or side
If it has, the oil in the compressor will need at least
one (1) hour to drain back into the compressor
before powering up the oven.
WARNING
:
STEPS
Carefully remove the A/C cover and sit it in a safe
place - will be attached later in installation
process.
6
