9.
Attach the belt guard cover.
Inspect & Clean Spark Arrestor (if
Equipped)
Equip engine with spark arrestor if
machine will be used near any ignitable forest,
brush, or grassy land. (See engine Owner’s
Manual provided to determine if the engine is
already equipped.) Make sure you comply with
applicable local, state, and federal codes.
If the engine is equipped with a spark arrester,
clean and inspect it regularly following
manufacturer’s service instructions. Replace if
damaged.
Keep Compressor Clean
Do not allow air intakes to become blocked. If
dust or debris accumulates in the compressor,
clean the compressor with a damp cloth or soft
bristle brush.
Note: Do not spray compressor with a
garden hose or pressure washer. Water
may enter the compressor and cause
damage to the engine and pump.
IMPORTANT
WWW.TMGINDUSTRIAL.COM
P21/27
Toll Free:1-877-761-2819
If a part needs replacement, only use parts that
meet the manufacturer’s part number
specifications.
Replacement parts that do not meet specifications
may result in a safety hazard or poor operation of
the compressor. Major service, including
installation or replacement of parts, should be
made by a qualified electrical service technician
.
