W W W . T M G I N D U S T R I A L . C O M P 1 0 / 2 0 To l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Figure 4
Lay down all (6) trusses on the ground when the assembly is all completed and
before moving to next step, and then wrap (#38) around the sharp points of the
joint to avoid friction between the fabric and the interface, resulting in fabric
damage. (refer to figure 5)
-
(2) Scratch resistant tape (#38)
Figure 5
Step 3 : Put up the front truss
Put up the front truss: use a crane is the best and safest way, otherwise pull with
ropes is another option, but you have to make sure it is safe, and you have enough
manpower. We recommend 4 to 6 people to pull the truss up from different
directions. When the truss is up, tie the ropes to the heavy objects to make sure the
truss will stay upright steady, and use bolt (#29) to connect the truss to the base
plate. (refer to figure 6)
