Wireless NVR Kit Manual
26
Function name
Function explanation
SMTP server
The input format is smtp. Mailbox server name .com, for example
smtp.126.com
User name
Mailbox full user name
，
Password
Email Password
Encryption type
The default can choose to not select, if the test fails, then modify to
SSL
Sender
The sender's full email address, need to be consistent with the
user name, for [email protected]
Recipient
The recipient's full email address can be used to receive mail from
the sender's address
interval
The time interval for receiving mail
Health mail interval
The time interval for sending messages when the device is running
normally
Explanation
After the E-Mail setup are completed, you need to set the alarm setup and video detection to send
mail.
The health mail interval will only take effect after checking the turn on checking box.
If the E-Mail function does not work properly, please make sure that the mailbox is enabled for the
SMTP service.
4.4.5 PPPoE
Function explanation
：
Support dial-up Internet access.
Steps
：
1, Right click the main interface, in the shortcut menu, select the network setup -> PPPoE. As shown below:
2, Check the turning on checking box, in the edit box, enter the user name and password provided by ISP.
