Wireless NVR Kit Manual
12
4.1.3 Logout
If the users need to log out the process, you can right-click shortcut menu, select to exit system. Click the
user to log off, then you can complete. As shown below.
if the user needs to log off automatically, in the system settings -> General settings, you can set open the
automatic logout state. The system will automatically log off the system in 1 minute without the operation.
When re-operation, you need to re-enter the user name and password.
4.1.4 Restart
If the users need to restart the machine when using, right-click shortcut menu, select the exit system, click
the system to complete the restart.
4.1.5 Close the screen output
If the user need to close the screen output when using, right-click shortcut menu, select the exit system,
click to close the screen output to complete.
4.1.6 Shut down
If you need to shut down the system, you can right-click the shortcut menu, choose to exit the system. Click
to close the system to complete.
4.2 Boot wizard
After the successful login, the system will automatically open the "Setup Wizard" interface, guide the user
to set the basic settings, so that the device can work properly.
Steps:
1, set the wizard. You can set whether to turn on the boot wizard. Set the interface as shown below, after
the operation is complete, left click on the next button.
