Wireless NVR Kit Manual
8
power all the device to complete the second step, when all the IPC video show on the NVR monitor, that
means the kit is working properly, can be installed to a predetermined location.
1, Unplug your NVR from power,unscrew and remove the top cover.
2, Connect the SATA power and data cables from the NVR to the corresponding ports on your HDD (as
shown).
3, Holding the hard drive and the NVR ,gently turn it over and line up the holes on the hard drive with the
holes on the NVR. using a Phillips screwdriver, screw the provided screws into the holes assemble the
cover.
Figure 5.1
