1. Description Of The Indoor Monitor
1.1 Fittings
5
6
LAN
OPERATION INS
IP Villa Video Intercom Sys
Quick Guide
Indoor monitor
(1pcs)
Screw anchors
(4pcs)
Wall screws
(4pcs)
Bracket
(1pcs)
4pin Line
(3pcs)
A Network Conversion
Line with 4 pin interface
(1pcs)
Quick Guide
(1pcs)
External Switching
Power Adapter--DC
12V(1pcs)
Please check that the socket of power supply(silk printing J1) is correct if you connect
the external switching power supply, otherwise it will damage the device.
1.3 Note On Wiring Connection
The electric lock and power supply of electric lock are not included in the package, you can
purchase an electric lock which is suitable for your need.
In the standard delivery the system supports locks with Normally Open (N.O.) door unlocking
method. It means that in the normal state the dry contact is opened so the lock is kept under
constant closed state. If the unlocking push-button is pressed and the dry contact is changed
to closed, then the lock is released.
1.4 Installation Process
1
5
0
-1
6
0
c
m
Monitoring 2
Unlock
Talk
Hang up
1
2
Monitoring
1
For IP 7’’ display series, user can connect up to two 4C outdoor cameras and three
extendable indoor monitor(video door phone) one by one to the corresponding interfaces
by their own’s requirement according to the following wiring diagram. The ethernet
connector is a 4 pin connector, user needs to connect a network conversion with 4 pin
interface to it(shown as below for example).
Note: The indoor monitor uses an external switching power supply.
1.2 Wiring diagram
* Avoid installation of the device near strong radiation e.g. TV set and PC etc.
* Maintenance should be complied with a qualified technician.
* Avoid hard shake , beating and collision, otherwise the internal exact components
maybe be damaged .
* Select the most suitable position where the monitor is located at user's eye level.
* Switch off power supply before installing.
* Keep more than 30cm away from AC power supply to avoid external interference.
* Keep it away from the water and magnetic field.
NOTE:
For IP 7’’ Display Series
AUDIO
VIDEO
GND
DC12V
AUDIO
VIDEO
GND
DC12V
AC/DC power
(not included)
lock
(not included)
DOOR1
DOOR2
DOOR1
AUDIO
VIDEO
GND
DC12V
AUDIO
VIDEO
GND
DC12V
AC/DC power
(not included)
Lock
(not
included
)
DOOR2
IP Indoor Monitor
P
o
w
e
r
LAN
L
A
N
TX-
RX-
RX+
TX+
G
N
D
+
1
2
V
External power supply
DC 12V
Internet
To next extendable
indoor monitor
DC-IN
CAM 1
TV-out
CAM 2
IN
DOOR1
DOOR2
OUT
Indoor monitor
(Video door phone)
Audio
GND
DATA
Video
AUDIO
GND
DATA
VIDIO
To next extendable
indoor monitor
The indoor monitor with built-in power supply can be connected directly to the plug or
connected to the power box via the 2-pin cable we provided. In order to keep your home
nice, if you do not want to connect the indoor monitor with the plug, you can use our 2-pin
cable to connect the monitor (see below), please cut off the power cord, together the power
cord and our 2 pin cable, then connect the cable to the electrical box directly, and the
indoor monitor can work.
Summary of Contents for MZ-IP-V739W
Page 26: ...47 48 ...