33
Stream
: Set up network stream, including main flow and minor flow.
Door:
Choose door number, door 1 or door 2.
Image
: Set up the size of view image. Options include Fit size and Src size.
Number of connected users:
Show number of connected users on mobile phone or IE(PC).
“
Mobile phone: 0”
means no user connected via mobile phone.
“IE(PC): 1”
means one user connected via IE on PC.
5.2 Media
Click “Media” to enter the media parameter setting menu. This interface includes settings for
Video and OSD.
Click “Media—Video” to access the interface as follows. And user can set up parameters of main
stream, sub stream and mobile stream.
A. Video—Main Stream and Sub Stream
1
）
Resolution: For the resolution of main stream, there is only D1(720*576). And for the
resolution of sub stream, there is only CIF (352*288). The bigger the resolution is, the clearer
the image will be. On the other hand the bit rate is bigger and takes more bandwidth.
2
）
Bit Rate: User can choose a certain bit rate, generally speaking, the bigger the bit rate is,
the clearer the image will be. Please choose the suitable bit rate according to your bandwidth.
If you select a big bit rate, while the bandwidth is worse, it will cause the video stream can't be
transferred smoothly, the video quality will be not perfect too.
3
）
Maximum Frame: User can choose a certain frame rate, when the bandwidth is limited,
suggest reducing the value. Generally, the video is fluency if the value is more 15 frames.
Default value is 30 frames for NTSC norm and is 25 frames for PAL norm.
5.2.1 Media--Video
: Adjust brightness of image. Values can be set from 0~100.By default, the
value is set at 50.
: Adjust contrast of image. Values can be set from 0~100.By default, the value
is set at 50.
: Adjust saturation of image. Values can be set from 0~100.By default, the
value is set at 50.
Powerfreq
(Power Line Frequency): Options include 50HZ and 60HZ. If the monitoring site
adopting lighting elimination, user should set a corresponding frequency. If the two frequencies
are different, the image will flick. There are two frequencies on the world, one is 50HZ, and the
other is 60HZ. In China, adopt 50HZ.
Click “ ” to refresh the settings of the Image, and click “ ” to restore the parameters of
the image to the default settings.
34
Click “Media—OSD” to access the interface as follows. OSD options include “Time Stamp”,
“Device Name” and “Name”.
1)
Time Stamp
: From this field, users can decide time stamp will be shown on the home page
for live viewing as the OSD (On-Screen Display) string wether or not.
2)
Device Name
: User can add the equipment's name on the home page for live viewing
through this setting.
3)
Name
: Users can modify the name of the indoor unit. Note that the name of the device must
not exceed twelve arabic numbers, letters or twelve Chinese characters.
5.3 Parameters
Click “Media” to enter the parameters setting menu. This interface includes settings for
Network (Basic Settings, DDNS, E-mail and Wifi) and Event(Press doorbell capture).
5.2.2 Media--OSD
4
）
Bit Rate Type: There are three modes for bit rate control, CBR, VBR and FixQp. If user
choose CBR mode, the video encoder will encode according to the bit rate you have selected.
If user choose VBR mode, the video encoder will consider to the image quality and encode
according to the bit rated have been selected, but not strictly according to this bit rate.
Suggest VBR mode.
5
）
Audio: Options include “On” and “Off”.
B. Video—Mobile Stream
1) Resolution: The resolution of mobile stream is QVGA (320*180).
2) Quality: The image quality of the outdoor camera for remote access viewing via mobile
phone. And there are five options: “Very High”, “High”, “Normal”, “Low” and “Very Low”. The
better the image quality is, the bigger the bit rate and the frame rate of the outdoor camera
are. Please choose the suitable quality according to your bandwidth.
5.3.1 Network--Basic Settings
Click “Parameters—Network—Basic Settings” to enter the LAN Settings interface. Default IP
address of the equipment is 192.168.0.111. The user can set up device network parameters
through the operation “Quick Setting Guide”, user can change it according to your network
environment.
Summary of Contents for MZ-IP-V739W
Page 26: ...47 48 ...
